3D Potterbot Scara v4 3D Printer with Small 50 Pump

Overview

The 3D PotterBot Scara V4 is a large-scale 3D ceramic printer for clay and other soft materials. Paired with our newest pump, it has become the most versatile and convenient way of printing large-scale architecture and other structures.

Printing Capabilities

The 3D PotterBot Scara V4, our largest model for 3D ceramic and paste printing, can print multiple large objects non-stop. It can also be combined with a continuous flow hopper to print structures and walls. This advanced design and substantial construction handle onboard loads like the 3D Potter 3600 ml clay extruder or a hose assembly. When coupled with our new large-capacity continuous high-pressure hose extrusion system, it delivers clay loads between 85-250 lb continuous extrusion.

Multipurpose Pump

The small 50 multipurpose pumping machine operates continuously on 110v 20 amp service. It pumps up to 3.5 gallons of material per minute through 85 ft of 1″ hose. The new variable flow rate ranges from 1.7 to 30 cubic feet per hour. It is easy to use, easy to clean, and a money-making machine!

Unique Features

• Large-Scale 3D Printing: The build envelope diagrams represent the 45 in z height. We can customize z heights up to 9 feet and diameters up to 8.5 feet. The Scara V4 build envelope is unique as it can print 360 degrees with continuous rotation, allowing the creation of huge vessels with the printer inside the structure. This opens opportunities to print habitat structures (houses). Larger printers are available for this project.
• Sequential Printing: The Scara V4 can print multiple objects within the specified envelope sequentially. For example, print a vessel on the far left side and continue until there’s no more space.

What’s Included

• Scara V4-409
• Closed-loop stepper on x, y, z, extruder
• 3600ml extruder, 2 tubes
• 5 anodized aluminum nozzles (sizes: 3, 4, 5, 6, and 8mm)
• Parts box: Allen key set, grease, acme driver tool, tie wraps, extra screws
• Power supply

Specifications

• Printing envelope: x/y- 72″ diameter circle (1829mm), z- 45” (1143mm)
• Printer size: w-34” l-18” h-44”
• Normal operational space needed: w-40” l-36” h-~70”
• Maximum operational space needed: w-88” l-88” h-~84”
• Height to top of extruder fully extended: h~84” (2134mm)
• Weight with extruder: 90 lbs. (41kg)
• Average speed: 1.2’’ to 3.9’’/s (30 to 100 mm/s)
• Power supply: output – 24v ~15 amps, input – 110-220v, 50-60 hertz
• Power consumption: 24v ~10 amps, ~240 watt
• Main controller board: Running Duet3D with Atmel SAM4E8E, 120MHz ARM Cortex-M4

User-Friendly Control

Enjoy full control through a web interface, with no apps or software installation required. Non-wifi versions are available; please contact us for an Ethernet connection.

Industrial-Grade Performance

This is not a souped-up 3D printer, but a dedicated heavy-duty purpose-built robot. It uses sophisticated harmonic drive units, the same drives found in large industrial robots. These drives offer precision movement down to fractions of a second of a degree, ensuring precise prints with no backlash or jittery movements. They are designed for maximum rigidity and extreme accuracy.

Setup and Space Requirements

Position the machine on a substantial tabletop to start printing within a limited envelope area. Alternatively, dedicate a space for partial or full envelope. The space needed depends on the end-user and the chosen print envelope. Whether on the tabletop or the floor, the Scara V4 requires direct mounting for maximum stability, achieved with multiple screws. If using a tabletop, ensure it is of substantial construction (minimum 1.5″ thick heavy plywood or wood). An inadequate table will diminish print results depending on the build envelope and print speed.

Special Clay for 3D Printing

The advantage of direct extrusion is printing full-body clays or other paste-like materials. All materials used to build our printers are food-grade, so get creative! Take your favorite pottery clay and wet it so that it is too wet to throw, and you are ready to go. Experiment with the wetness level to print correctly for your projects.

Outbound Links: For more information, visit our website. Check out our YouTube channel for tutorial videos.

Internal Links: Explore our other 3D printers. Learn more about our pumping machines.

Keyphrase: 3D PotterBot Scara V4 Large-Scale Ceramic Printer